There are a few things I consider truths, in my practice of arms and keeping arms for protection and home defense.
Thing The First: If you keep firearms for personal or home defense, having rapid access to them is fundamental. Tools aren’t useful if they aren’t at hand when needed, particularly tools that are needed immediately. The flip side to this, is that dangerous tools must be safely stored to prevent negative outcomes such as unwanted access. For a long time now I have adopted a binary approach to my carry gun, regarding access: It is either holstered on my body (where I control access to it), or it is locked up (where unwanted access to it is prevented). The best place for it is on my body, where I have active control, but also where I can most readily access it if needed. The downside is that, this isn’t always comfortable or possible.
Thing The Second: A pistol is a valuable home defense tool. While long-guns are superior fight winners, and we have discussed the versatility of shotguns in particular, they present challenges for moving through your home with. Especially if you are moving to other family members, to secure or extract them. As a parent, I can over-encumber myself with a long-gun if I have to move to my children’s bedrooms and retrieve them, or move one to the others room to barricade. A pistol is a much more functional choice for solo house clearing, particularly with the intent to then handle small people.
Thing The Third: In a home defense scenario, there are things I need beyond just a firearm. I need a light, I may need medical equipment, I may need other support gear. While many of us just yardsale our light, magazines, and daily carry medical into a bedside valet tray or shelf in the safe at the end of the day, that loose assortment of crap is hard to pick up and tote around. Woken in the middle of the night, many of us are in minimal clothing if clothed at all, and where do you put it all?

With these three points in mind, I have long practiced staging a pistol, when it’s not on body, in a secure but accessible way, along with a few essential support items. This has been an evolving process over the past near-decade, wherein I’ve tried a range of things: Keeping a dedicated pair of cargo shorts with a light clipped on and pockets stuffed with medical gear beside the gunsafe; A plate-carrier with holster, magazines, trauma kit, and flex-cuffs on it; A “happy sack” claymore bag full of reloads and med gear; A warbelt with holster, magazines, trauma kit, etc.
Each thing I’ve tried had some merit, but wasn’t as functional or easy as I wanted it to be. The closest I came to a single, easy to use, platform for putting on quickly to deal with a bump in the night, was the warbelt. With the warbelt, I could have a complete support setup of spare magazines, trauma kit, and even a holster and handgun, on an easily donned platform, that required no additional components and was semi-functional regardless of manner of undress. The warbelt, however, required either that my carry gun be transferred into the holster every night before bed, or in the middle of the night during a crisis. If stored with the gun in the holster, the whole thing had to be secured within a safe. If the gun was kept locked up, and the warbelt hanging somewhere, it took time to retrieve both and put them together. And there was absolutely nothing subtle about the warbelt. If, for some reason, I had to walk out of my house with it on, it was going to be problematic.
For the past several months, I’ve been using a different tool to bring all of these things together similarly to what the warbelt did, but that also allows fairly open public wear. The venerable, infamous, fanny pack.

After trying a few things low-key, I picked up an Elite Survival Systems TailGunner 2 fanny pack, and begin to using it seriously. ESS makes a variety of gun fanny packs, for both full size and compact guns, in different styles and materials. I chose this one because I found it on sale, it was big enough for a Glock 17, and it was in a style similar to long established pistol fanny packs such as Tommy and Eagle. In fact, it appears to be a clone of the older Eagle Industries Weapon Fanny Pack.
Made from 1000D Cordura, the TailGunner 2 is on the heavy side, but isn’t lacking for robustness. The heavy material is further reinforced by solid stitching, and foam padding between front and back layers. The material, and padding, effectively block out the shape of the bag and prevent whatever you put inside from printing an outline through the material.

The design of the TailGunner 2 is very simple. A flush-fitting front pocket spans the entire width of the bag, and the main body is a single pouch which zips almost entirely around, allowing it to fully open up. Inside that main pouch is a Velcro hook field on the body side, and a pair of elastic loops and Velcro loop strip on the opposite side. Running across the hook field, vertically, is a simple strap affair, sewn at the bottom and threaded through a steel loop sewn at the top of the compartment, with mating Velcro on the body and running end of the strap. This is for securing a holster within.
The TailGunner 2 comes with two different sizes of “holster” insert, both of which have loop Velcro exterior for mounting on the hook field. I put holster in quotes, because these are loose, universal fit, thin bits of fabric that conform to no particular gun, provide no passive retention, and are flexible enough to allow outside objects into the trigger guard. These got a flaccid pass from me, and were thrown in the trash as soon as the pack arrived.
Fortunately, the strap arrangement is an excellent means of locking a more secure holster into the TailGunner 2. I am able to put my carry holster, a Dark Star Gear Orion, into the bag and secure it very quickly with the strap running through the steel clip (and behind the Dark Star Darkwing attachment). A Velcro loop field on the rear of a holster will make this attachment even better, as it attaches to the hook field allowing a set angle to be established. Although this strap attachment may not work for every holster, it works with most of them that I have tried, including WML holsters, and those using soft loops and other attachments.
For a dedicated holster for this, I would look to the PHLster Skeleton. A minimalist holster, with the width of a full size holster, the Skeleton fits the strap extremely well, and almost seems designed to lock into it. With a clip, or soft loop, around the strap, it is perfectly secure for even vigorous drawstrokes and rapid movement.

Inside the main compartment of the Tailgunner 2, at each top corner of the front side, are hard-sewn pull tabs. One of these can be pulled up and left exposed, between the closed dual zippers, providing a ready grab-handle for quickly pulling open the pack. A firm forward and downward pull on this will unzip the entire pack, allowing access to the handgun within.
In addition to the main compartment and front pocket, the Tailgunner 2 features “wings” on either side of the bag, that offer additional cargo capacity. On the left is a small PALS field, which while not super discreet is useful for clipping other items to, or mounting pouches or other gear. On the right, is a zipper pocket, in the shape of the semi-triangular wing. Although not able to hold a great deal, this pocket provides a place to stash your phone for hands free use (such as staying on the phone with 911), or to store small items like pepper spray.

There is also shock-cord laced across the front of the Tailgunner 2, with a barrel-lock for adjusting it. This could be convenient for some users, particularly for regular wear where it makes a handy way to store a cap or gloves for short periods. It turned out to not be useful to me, and somewhat in the way, so I unlaced it.

After several months of wearing the Tailgunner 2 regularly, and training with it on the range and in the gym, I’ve come to a setup that I am reasonably happy with. My carry gun and aforementioned Dark Star holster are in the main compartment, along with a factory 33rd magazine. In the front pocket rests a SOFT-T-Wide tourniquet, nitrile gloves, a full sized pack of Celox Rapid, and a roll of Combat Medical Battle Wrap (a clear, elastic, adhesive trauma bandaging product). On the left wing, attached to the PALS field, is a Fenix flashlight, a 1000lb break strength cord handcuff, and a container of pepper spray. The right wing pocket is left empty for stashing my phone in.

I cut off the original zipper pulls, and replaced them with cord-pulls closed with heat-shrink. Although high quality YKK zippers, the factory pulls were large metal affairs, which jingled quite a bit and were a source of unwanted attention. Cutting them off, and replacing each with smaller cord pulls achieved both silencing the pack, and keeping unnecessary tabs out of the way. With the pull-cord opening widget exposed, the zipper pulls are not needed to access the pistol, and grabbing one along with the pull-cord would jam the opening action. Reducing the size of the pulls effectively negates that possibility.

After removing the shock-cord gear retainer from the front, I ironed on a faux Supreme logo patch to help break-up the profile of the fanny pack a little more, for the occasions when I do wear it outside the house. Being made from heavy Cordura, with a bit of PALS, and square boxy construction, the Tailgunner 2 does benefit from a little added misdirection to deepen its deception.

Using the Fanny Pack
The primary role for this fanny pack setup (jokingly named the Booga-Lite bag, for the front yard boogaloo) is to wear at home. I am a work-at-home parent while my husband is getting his degree, so most of my time is spent at and around my house. With two kids at home, unsecured firearms are an absolute no, so either I carry or the guns are behind locked steel doors. Working from home, I don’t have a dress code or much reason to put on a belt, and the reality is that it’s inconvenient to have to belt up, put on a holstered pistol, and go about my day around the house. There’s a lot of ways to solve this, smaller guns and pocket carry, sucking it up and embracing the “comforting not comfortable” bullshit mantra, not carrying at all, and so on. None of those ways solve it particularly comfortably, cheaply, and with the ability to have onboard medical and support gear, except for the fanny pack.
The Tailgunner 2, as I have it set up, allows me to quickly don pistol, support gear, and med kit, regardless of what I am wearing at the moment, and comfortably keep it all available while going about my day. Because it has a somewhat discreet appearance, I can wear it out into the yard or when going on afternoon walks around the neighborhood with the kids, without arousing suspicion of my neighbors. When I am not wearing the Tailgunner 2, it isn’t much bulkier than a gun-rug style pistol case, and can be locked in many pistol safes, lock boxes, or larger safes, with ease. It can be quickly retrieved from there, and fastened around the waist or tossed over the neck, as a home defense platform. 

I am still not using the fanny pack for routine concealed carry outside of the house. Although fanny packs are currently low-profile and, if selected properly, not likely to draw much attention, I am much happier to wear my pistol AIWB and carry support gear on my person in other means. Although worn around the body, and more secure than a shoulder bag, fanny pack carry is still closer to “off body” carry than not, and comes with challenges that must be understood. A one-handed draw from the fanny pack can be rather difficult, simply because of the steps required to open it. In a fight that begins at contact distance, where you must fight to a dominant position before accessing a weapon, the fanny pack is likely to shift around significantly, and may even get unfastened from the waist. Even if you achieve dominant position, an effective single handed draw from the fanny pack while maintaining control is going to be challenging. For these reasons, plus being able to dress in ways that don’t favor adding a fanny pack, I primarily choose not to use the Tailgunner 2 for routine concealed carry.
This choice is why I don’t have a permanently attached holster in the Tailgunner 2. At the end of a day outside the house, I can come home, take my carry gun and holster out of my pants, and mount it in the fanny pack for continued wear. Doing this, rather than unholstering and reholstering, minimizes the administrative handling of a loaded unholstered pistol.
My routine looks something like this: If going out, I take the pistol and Dark Star Gear Orion out of the fanny pack, and put it on as usual. When I get home, the entire package is remounted to the Tailgunner 2, and that gets put on with whatever more comfortable around the house clothes I’ve slipped into. At night, when I go to bed, the Tailgunner 2 with the pistol inside, is placed in the safe in the master bedroom, where it can be retrieved quickly in the middle of the night. When I get up in the morning for a typical day around the house, the fanny pack can be removed and put on, and the safe locked behind it.

Booga-Lite II: The Unsubtle Boogaloo

While playing with the Tailgunner 2, and exploring the role of the fanny pack as a platform for home defense, I set up a second rig that is far less subtle. Using a cheap imported fanny pack from Amazon, that is much more “tactical” in style than the Tailgunner, I built a platform for holding a handgun, long-gun reload, support and medical gear, that makes no bones about what it is.

The HuntVP fanny pack I used is a clone of the Maxpedition Octa, itself a variation on the old Eagle ERB. It has a PALS(-ish) field across the entire backside of the bag, to which I mounted a Blue Force Gear Ten-Speed Double M4 mag pouch. Into the right hand pouch, I forced a PHLster Skeleton with a Discreet Carry Concepts clip on it. The clip goes over the pouch, and the PALS on the fanny pack, and provides retention for the holster. Into the left side pouch, I can put a rifle magazine, or a carrier for the QD-C sidesaddle. The very front pockets are loaded with nitrile gloves, and tourniquets, and the main pocket of the pouch is filled with hemostatic, trauma bandages, NPA’s, and a Rescue Hook. A flashlight can be clipped to the webbing on the front of the pouch, along with a can of pepper spray, or other items.

The role of a bag like this would be similar to how I use the Tailgunner 2 for a “bump in the night” platform. It could be easily stored in a medium lockbox or safe, and provides ready access to your fundamental home defense equipment all on a single platform. Exact configuration would depend on your needs. I set it up fairly medical heavy, but you could easily put a single PHLster PEW and tourniquet in the front, and use the main compartment for tactical gloves, flex cuffs, additional lights, more reloads, or whatever you deemed appropriate for your mission/needs. For a strictly grab-and-go fighting loadout for the homeowner, this higher profile setup has a lot of merits: It nearly duplicates the position and drawstroke of an AIWB carried pistol, allows for more reloads (or different ones) to be carried ready to access, and just generally offers more support capability in an overt role. For my needs, this will be my least used booga-lite rig because of that overt nature, but if all I needed was a home defense platform, this would be the prime contender.
You could use this ERB style of bag for a less overt rig, as well, but after trying both styles, I have come to prefer bags constructed like the Tailgunner 2, that open up fully like a clamshell, for carrying a pistol within. This almost entirely eliminates the potential for hanging up your draw, from within the bag, on the opening (a distinct possibility with a bag constructed like the ERB).

The fanny pack is versatile, for concealed carry or as a platform for emergency equipment, beyond these ideas. My uses for the fanny pack are a narrow scope of what is possible, and my setups may not be ideal for everyone. This is offered to give structure, and a starting point, for your explorations. 

(This article contains an Amazon Affiliate link. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)